Stanton SA.3 Manuel d'utilisateur télécharger pdf (Page 6)

4. Input Gains - Controls the input sensitivity level for each

channel. Use the input gain in conjunction with the LED meters

(

19) to properly set the levels of your input.

5. Input Equalizers - Individual controls for high frequency,

mid-range, and low frequency equalization with 9db of boost and

25dB of kill.

Note: Any changes made to EQ settings will change

the overall output level of that input.

6. Input Pan - Controls left / right output balance of each chan-

nel.

7. Cue Level - Controls the output level of the headphone amp.

8. Master / Cue Switch - Selects signal to be sent to head-

phone output. In “CUE” position, the cue pan fader (9) is used

to select which input channel is to be monitored. In “MASTER”

position the master output is sent directly to the headphones.

9. Cue pan fader - Fades the headphone output from input 1 to

input 2 when Master / Cue switch is in “Cue” mode.

10. Master Level - Controls the overall output level of the mas-

ter output.

11. Master Mute Indicator - LED indicates when Master Mute

switch (12) has been engaged.

12. Master Mute - Mutes the master output of the mixer. Use

the master mute in situations where you need to mute and

unmute the mixer without having to re-adjust your Master Level

(

10) control.

13. Reverse Indicator - Bi-color (red & green) LED indicates

when fader’s direction has been reversed (green = normal, red =

reversed).

14. Reverse Button - Reverses the direction of the fade on the

corresponding fader.

15. Line fader Curve Control - Selects taper of upfader curve

between a fast cut, medium curve, and long fade.

16. Input Select - Toggle switch selects the input source

between the phono and line inputs located on the back of your

mixer.

MIXER FUNCTIONS

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Stanton SA.3 Manuel d'utilisateur Page 6