Stanton T.55 USB Manuel d'utilisateur télécharger pdf (Page 3)

ASSEMBLY

CONNECTIONS

PLACEMENT

Ribbon tape

Driving roller

Drive belt

Set the PH/LINE

switch to Line”

Set the PH/LINE

switch to “PH”

Thank you for purchasing the T.55 USB turntable from Stanton. The T.55 USB is built upon Stanton’s heritage of designing audiophile products

for the most discriminating listener. Before assembling the T.55 USB please check to make sure the following items are included with the main

unit in the carton.

 AC cord

 RCA cable

 45 rpm adaptor

 Counter weight

 Cloth dust cover

 Platter with belt (Belt is located underneath the platter)

 Slipmat

 Stanton 500.V3 Cartridge pre-mounted on headshell

except on model T.55USBX, no cartridge included

 Cakewalk Pyro Audio Creator LE

 User Manual

 Target light

After confirming that all of the above parts are included in the box, its time to assemble the turntable.

1) Remove the platter from its protective wrapping and place on the spindle of the main unit.

2) Loop the belt over the motor pulley. Be sure it does not twist.

3) Remove the slipmat from its protective wrapping and place on the platter.

4) Place the counter-weight on the back of the tonearm assembly.

5) If desired, place the 45rpm adaptor in its allocated holder on the main unit.

- Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance.

- Do not place the unit in a location where there is high humidity or a lot of dust.

- Cartridge may pick up slight sound pressures or vibrations from the speakers coming along the floor or through the air resulting in feedback. Find a location

which is very stable and vibration free.

- The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.

Before connecting the unit it is advised that you also consult your current equipment instruction manual.

Note: Be sure to turn off the equipment before you make changes to the different connections.

1. Connect the power cord to an AC outlet.

2. Connect the RCA cable to the PHONO input of your amplifier.

Output terminals Amplifier(Receiver)

L (White) L Channel

R (Red) R Channel

You can also use a line input by setting the phono / line switch at the rear of the turntable

to line.

3. Connect a PC via USB cable.



1 2 3 4 5 6 7 8 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Stanton T.55 USB Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs Stanton T.55 USB